Customer Evidence & Machine References

Loading Machinecraft…

Customer stories and machine referencesSee machines at customer sites, factory acceptance trials and forming demonstrations. Each reference identifies what was supplied or demonstrated; proposed concepts are listed separately.

Use these references for your project

Compare the application, machine and demonstrated scope, then discuss your part, tooling, material and production requirement with Machinecraft.

Published 2026 updates

Dated FAT account · May 29, 2026

Japan-bound machine: factory acceptance trial

The published update describes a factory acceptance trial for a large-format machine intended for Japan.

A FAT account is not an installed-production result. The tested part, acceptance records and current machine status require a project-specific review.

Read the published Japan FAT update Explore the current large-format family Review industrial covers and housings

Related current routes, not an identification of the historical machine or its customer application.

Dated installed-machine support account · July 17, 2026

US installed machine: secondary-market acquisition and OEM support

The published Indiana update describes a PF1-series machine acquired on the secondary market and subsequent Machinecraft OEM support.

This was not a new direct Machinecraft machine sale. The account does not establish a certified new delivery, measured production result or current service commitment.

Read the published Indiana support update Request support for an existing machine Explore current applications

Current routes for further review; the article does not establish one of the three promoted applications.

Evidence register

Installed machines

Published installation record

Sweden thick-sheet installation record

The preserved May 4, 2017 archive article reports a Machinecraft thick-sheet thermoforming machine installed at a customer site in Kalix, Sweden in September 2016, used for water well covers.

Machine or scope: Thick-sheet thermoforming machine; model not stated in the retained record

Evidence boundary: The archive supplies the installation location, timing and application. It does not supply a customer identity, machine model, capacity or current installation status.

Read the preserved Sweden archive · Browse current machine routes

Factory Acceptance Trial

Factory Acceptance Trial

PF1-X-5028 XL vacuum forming machine

The retained article reports a Factory Acceptance Trial completed to full specification before dispatch, including system checks and trial parts formed for dimensional accuracy and surface quality

Machine or scope: PF1-X-5028 XL with closed-chamber forming, multi-zone heating, servo-driven forming and recipe-based controls, as reported in the retained FAT article

Evidence boundary: Historical archive reference; confirm released project records before treating it as a current specification, customer case study or production guarantee.

Machinecraft PF1-X-5028 XL vacuum forming machine in the factory — Original archive photograph for the PF1-X-5028 FAT article.

PF1-X-5028 FAT archive · Review the PF1-XL machine route

Historical forming reference

Historical forming reference

PF1-X-1210 historical forming reference

PF1-X forming equipment shown in the official historical demonstration

Machine or scope: PF1-X-1210 historical forming reference

Evidence boundary: Official historical PF1-X process footage and a related-platform photograph. It shows a forming reference only; current machine scope, tooling, material and performance require project review.

Machinecraft PF1-family machines in a historical factory photograph — Historical PF1-family machine photograph. Final configuration is agreed with your quotation.

Watch the official forming reference · PF1-X machine page

Historical forming reference

PF1-X-6022

Large-format forming equipment shown in the official historical demonstration

Machine or scope: PF1-X-6022

Evidence boundary: Historical large-format PF1-X-6022 reference. The footage is not a specification or a result for every XL machine, format or application; confirm the complete envelope and configuration for the proposed part.

Machinecraft large-format machine with a formed HDPE part in the factory — Large-format Machinecraft reference photograph. Confirm the complete envelope and configuration for the proposed part.

Watch the official large-format reference · PF1-XL machine page

Historical forming reference

Historical PF1 deep-draw forming reference

Deep-draw forming equipment; the proposed Poseidon form, shear and QC sequence is scoped separately

Machine or scope: Historical PF1 deep-draw forming reference

Evidence boundary: Historical deep-draw forming reference for bedliner and spa-shell work. It is not footage of the complete Poseidon form/shear/QC line and does not establish a production outcome.

Historical Machinecraft deep-draw former with an operator — Historical deep-draw forming photograph. The proposed Poseidon sequence is scoped separately.

Watch the official deep-draw reference · PF1-Poseidon machine page

Proposed concept

Proposed concept

PF1-Poseidon forming, shear and QC sequence

The proposed Poseidon form, shear and QC sequence is scoped separately from the historical deep-draw forming reference.

Machine or scope: Proposed PF1-Poseidon sequence; final integrated engineering scope remains to be agreed

Evidence boundary: This is a proposed concept, not an installed machine, FAT result, current production line or production outcome.

Review the proposed Poseidon route · Review the canonical bath application

Discuss your part with Machinecraft

Japan installation activity — August 2026

Installation activity is distinct from the May FAT reference. This photograph does not establish final customer acceptance, SAT or production readiness.

People working around a Machinecraft machine with access stairs and yellow rails during installation in Japan. — Machinecraft equipment during the Japan installation project, August 2026.