MACHINECRAFT.

Compare machines

Choose two or three current families. Compare the documented differences, not a performance ranking.

Family-level comparison, not a fit recommendation. Listed formats describe different catalogue dimensions, not finished-part limits or installed footprints. Material grades, tooling, draw, handling and output require engineering review. No prices or guaranteed performance.

JavaScript enables interactive selection and private same-tab enquiry transfer. Without it, review the catalogue facts and open the ordinary enquiry form. Machine-only comparison links carry no part brief. Project context is not stored in a share URL.

PF1-X

Servo-driven sheet forming for equipment covers and industrial housings.

Listed formats: 1000 × 1200 mm; 1000 × 1500 mm; 1200 × 2400 mm; 1500 × 2000 mm; 2000 × 2500 mm; 2500 × 3000 mm. Formats are nominal sheet D × W. Separate planning openings are demonstration/proportional studies, not approved ratings or finished-part fit.
Stock and loading: Automatic sheet handling is configurable; the source depicts pallet delivery, automatic pickup and sheet transfer. Confirm scope with engineering.
Drive: Servo-driven movement with coordinated platen movement; programmed motion and control scope require discussion for the actual part.
Forming: Sheet vacuum forming with configurable tooling and universal frames; illustrative products and provisional fit do not validate finished-part capacity.
Heating: Three listed heater choices: ceramic, quartz and halogen. Heating dwell and energy values are editable demonstration assumptions, not guaranteed performance.
Handling and automation: Source describes forklift tool delivery, pneumatic tool retention, universal frames and automatic sheet transfer; final scope is configuration-dependent.
Material examples — grade/tool review required: ABS, HIPS, PETG, HDPE, PP

Nominal formats and listed options do not establish finished-part fit, capacity, throughput, grade compatibility or certification. Confirm drawing, grade, thickness, tooling and configuration with engineering.

Explore PF1-X and source specifications

PF1-XL Series

Large cut-sheet forming for hydroponic trays and specialty vehicle panels.

Listed formats: 4000 × 2200 mm; 4500 × 2500 mm; 5000 × 2800 mm; 6000 × 1900 mm. Nominal planning rectangles only; not confirmed sheet sizes, forming apertures, footprints or service envelopes. Confirm with engineering.
Stock and loading: Sheet replenishment is shown in the image-based setup demonstration; feed specification: Confirm with engineering.
Drive: Confirm with engineering
Forming: Vacuum forming; forming aperture, tooling fit and validated capacity: Confirm with engineering.
Heating: Ceramic, quartz and halogen heater options are listed; installed power and thermal performance: Confirm with engineering.
Handling and automation: Image-based setup shows forklift delivery, trolley docking, pneumatic retention, frame setting and sheet replenishment.
Material examples — grade/tool review required: ABS, HIPS, PC/ABS, ABS/ASA, ABS/PMMA, HDPE, PP

Material names are listed planning inputs or illustrative examples, not validated grade compatibility. Nominal formats and model options do not establish finished-part fit, throughput or capacity; confirm with engineering.

Explore PF1-XL Series and source specifications

PF1-U Series

Cut-sheet forming for shower trays and short runs with frequent tool changes.

Listed formats: PF1-U 0810 — 1,000 × 800 mm clear opening; PF1-U 1012 — 1,200 × 1,000 mm clear opening; PF1-U 1218 — 1,800 × 1,200 mm clear opening; PF1-U 1015 — 1,500 × 1,000 mm clear opening; PF1-U 1224 — 2,400 × 1,200 mm clear opening; PF1-U 1520 — 2,000 × 1,500 mm clear opening; PF1-U 2030 — 3,000 × 2,000 mm clear opening. Displayed dimensions are clear openings (length × front-to-back depth), not sheet blanks, footprints or guaranteed finished-part envelopes.
Stock and loading: Manual sheet loading and unloading.
Drive: Pneumatic movement.
Forming: Cut-sheet pneumatic vacuum thermoforming.
Heating: Confirm with engineering; final heater specification is confirmed in the offer.
Handling and automation: Manual sheet loading and unloading; independent pneumatic tool locking supports tool-specific setups.
Material examples — grade/tool review required: Confirm with engineering

Listed clear openings are not sheet blanks or guaranteed finished-part envelopes. Tool fit, setup time, output and final configuration require project review.

Explore PF1-U Series and source specifications

PF1-A

Manually loaded, pneumatic cut-sheet forming for covers, trays and housings.

Listed formats: 1000 × 800 mm; 1200 × 1000 mm; 1800 × 1200 mm; 1500 × 1000 mm; 2400 × 1200 mm; 2000 × 1500 mm; 3000 × 2000 mm. Seven requested nominal forming windows, shown as length × width; not footprints, sheet blanks or guaranteed finished-part sizes.
Stock and loading: Manual sheet loading and unloading.
Drive: Pneumatic movement.
Forming: Single-station pneumatic cut-sheet thermoforming; vacuum forming/cooling is illustrated. Final suitability requires application review.
Heating: Heat, then retract heaters before forming; heating technology is not specified. Confirm with engineering.
Handling and automation: Manual load and unload; formed part is released and unloaded for separate trimming. Tool/frame exchange is manually bolted, with forklift assistance described for planning.
Material examples — grade/tool review required: ABS (4 mm illustration only; actual grade and gauge to be confirmed)

Nominal catalog windows and illustrative rectangular fits are not validated finished-part capacity. Confirm tool/part fit, material, gauge, heating, safety and configuration with engineering.

Explore PF1-A and source specifications

PF1-Samurai

Heavy-gauge vacuum forming for high-mix subcontract parts and equipment housings.

Listed formats: 1500 × 1000 mm; 2500 × 1300 mm; 2000 × 1500 mm; 2500 × 1500 mm; 3500 × 2500 mm; 4000 × 2000 mm; 4800 × 2500 mm. Nominal maximum frame (sheet) dimensions as listed; not a finished-part envelope or validated fit.
Stock and loading: Manual or Autoloader, model-dependent (listed options).
Drive: All servo on listed variants; Pneumatic is listed for 1525 Static Manual S-M-P.
Forming: Single station, closed chamber, pre-blow and plug assist.
Heating: Top and bottom; Quartz, Halogen or Carbon options.
Handling and automation: Universal or Static frames; Manual or Autoloader options vary by model.
Material examples — grade/tool review required: ABS 4 mm (listed example), ABS/PMMA 4 mm (listed example)

Nominal sheet-frame sizes and listed options only; no finished-part fit, validated capacity, throughput, cycle, or universal grade compatibility is established. Confirm with engineering.

Explore PF1-Samurai and source specifications

PF1-Poseidon

Acrylic bathtub and spa-shell forming with automated handling and supported inspection.

Listed formats: 3,000 × 2,000 mm. Nominal maximum forming aperture; blank needs clamp allowance. This is not a finished-part fit claim; confirm blank, tool and part fit with engineering.
Stock and loading: Original autoloader feeds a fixed-frame cassette.
Drive: Retained overhead transfer is listed; drive specification is not stated. Confirm with engineering.
Forming: Closed-chamber forming with forming, cooling and release following the part recipe.
Heating: Zoned heaters with regulated sag-support air prepare the sheet.
Handling and automation: Retained overhead handling places the shell on a matched nest; four-sided ShearBot removes sacrificial clamp margins.
Material examples — grade/tool review required: 8 mm solid cast PMMA

3020 is a supplied engineering concept/reference, not a validated capacity. Confirm material trials, blank/tool fit, handling, shearing and QC with engineering.

Explore PF1-Poseidon and source specifications

PF1-Bolt Line

Connected sheet forming and robot trimming for pickup bedliners and other large-sheet parts.

Listed formats: 2000 × 1500 mm; 2000 × 2000 mm; 2500 × 2000 mm; 3000 × 2000 mm. Nominal forming-platform options, not separate machine ranges; finished-part fit requires a Part Study and engineering review.
Stock and loading: Former with autoloader; the page describes automated cut-sheet forming.
Drive: Confirm with engineering
Forming: PF1-X former with forming-format options; forming fit is part-specific and confirmed in a Part Study.
Heating: Heating and forming are part of the former process; heating configuration requires engineering confirmation.
Handling and automation: Overhead gantry transfer and robot final trim cell are included; pallet stacking/outfeed handling requires project confirmation.
Material examples — grade/tool review required: HDPE, TPO, PP, ABS, ABS/PMMA, PC/ABS, Kydex, HIPS, PETG

Listed materials and formats are planning options, not validated capacity or universal compatibility. Confirm part fit, tooling, material, finish, handling and output with engineering in a Part Study.

Explore PF1-Bolt Line and source specifications

ATF Series

Roll-fed thermoforming for car-mat panels, with final contour trimming downstream.

Listed formats: 800 × 800 mm; 1200 × 1000 mm; 1200 × 1800 mm. Nominal forming-area options as displayed; full-part fit, nesting and tooling require engineering review for the selected model.
Stock and loading: Roll-fed; the supplied concept depicts an unwinder feeding the web with edge gripping and indexing.
Drive: Confirm with engineering
Forming: Roll-fed car-mat thermoforming concept; one panel per shot with two front mats and one connected rear mat. Shot cutting is shown; final contour trimming is separate.
Heating: Supplied concept depicts web heating from both sides; final heaters and settings require engineering confirmation.
Handling and automation: Supplied concept depicts edge-chain indexing and a stack cart after cross-cutting; this is illustrative and does not confirm delivered handling hardware or performance.
Material examples — grade/tool review required: Confirm with engineering

Nominal catalog forming windows are not finished-part fit or validated capacity. Confirm material, tooling, nesting, cycle, saleable output, hardware and final trimming with engineering.

Explore ATF Series and source specifications

Start with your part · Discuss your machine choices

Nothing is automatically submitted or added to your Quote basket. Public catalogue information does not require email verification; protected simulator access is unchanged.