Factory modelE-Mobility Body Parts FactoryFollow exterior panels and interior trim from sheet stock through forming, trimming, joining and dispatch.Follow exterior panels and interior trim from sheet stock to dispatch.Compare supplied part examples with proposed concepts and finite material-flow lanes.Explore how forming and trimming capacity affect the factory's output.Public preview, process walkthrough and worked example. Open optional 3D on demand in approved-access Machinecraft Builder.Explore the E-Mobility factory
Process walkthroughBathtub Production StudioFollow one bath through forming, supported turnover, reinforcement, curing and finishing.Compare PU backing and LFI reinforcement routes for a formed bath.Follow forming, supported turnover, reinforcement, curing and finishing.Explore the bath process or inspect individual stations in the optional studio.Public process explanation and poster first. 3D and static steps open only when chosen.Explore the bathtub studio
Process walkthroughPickup Bedliner Production — PF1-BoltFollow a pickup bedliner from cut-sheet loading and forming through Base manual or Pro gantry transfer, variant-dependent cooling and trimming, and pallet handling.Read all six reference-process steps without opening controls or loading a simulator.See which stages are optional and which handling choices need a part-specific review.Open the existing bedliner output planner on the PF1-Bolt page for illustrative output estimates—not rated throughput.Public walkthrough and approved reference overview. The existing output planner opens through PF1-Bolt’s email-verification entry; this is not a full 3D factory model.Read the bedliner walkthrough
Factory modelPortable Toilet Housing FactoryExplore portable-toilet walls, roof, door and frame from HDPE sheet through forming, CNC trimming, joining and kit preparation.Follow separate part campaigns, tool changes and material transfers.Compare the one-, two- and three-former concept layouts and inspect the exploded housing.See which parts are formed, trimmed and joined; open optional 3D and protected planning only when chosen.Public supplied previews and walkthrough. 3D and the USD cost/payback scenario stay behind email verification; all outputs are illustrative.Explore the portable-toilet factory
Factory modelHow We BuildExplore how a PF1-X is built through the guided factory film and interactive shop floor.Public process story and opt-in film. Shop-floor layout and timings are schematic.Explore how we build
Machine explorerATF Series machine explorerChoose a documented ATF catalogue option and inspect the supplied 36-view concept spin. This is an image explorer, not a 3D process simulation.Public supplied renders. The reference spin does not change geometry when a catalogue model is selected.Explore the ATF machine