UNO & DUO Series.
Compact and energy-efficient vacuum forming solutions. The UNO offers a single-station compact design for smaller production needs, while the DUO provides dual-station continuous operation with shared heating for maximum energy efficiency.
UNO Machine In Detail.
Compact single-oven design with integrated control panel
Operator demonstrating the compact UNO 80×80 forming chamber
Internal forming chamber with mold table and heating elements
Precision mold table with pneumatic cylinder operation
Top-side infrared heating oven with ceramic heating elements
UNO Series
Compact Single-Oven Vacuum Forming Machine
Entry-level vacuum forming for smaller production requirements and budget-conscious applications. Single heating system (top-side only) with compact design and smaller footprint. Single mould table cylinder operation.
UNO Key Features.
← Swipe to explore →
Single StationCompact Single-Station Design
The UNO is a single-station machine with a compact footprint, ideal for workshops and low-to-medium volume production. Fits in tight spaces without sacrificing forming capability.
- ▸Single heating station (top-side only)
- ▸Compact footprint for small workshops
- ▸Ideal for prototyping and short runs
HeatingIR Ceramic Heating Oven
Top-side IR ceramic heating oven with independently controlled zones. Recipe-based temperature presets for different materials and sheet thicknesses.
- ▸Top-side IR ceramic heating
- ▸Zone-wise temperature control
- ▸Recipe presets for fast changeover
VacuumIndustrial Vacuum System
Rotary vane vacuum pump for consistent deep-draw forming. Pneumatic FRL unit with solenoid valves for pre-blow, vacuum, and ejection functions.
- ▸Rotary vane vacuum pump
- ▸Solenoid valves for all functions
- ▸Consistent vacuum for deep draws
ControlsPLC Control with HMI Touchscreen
Mitsubishi PLC with touchscreen HMI for recipe management, cycle counting, and diagnostic monitoring. Easy to operate with minimal training.
- ▸Mitsubishi PLC controller
- ▸Touchscreen HMI with recipe storage
- ▸Cycle counter and diagnostics
Compatible Materials
Available Models
| Model | Forming Area | Description | |
|---|---|---|---|
| UNO 0806 | 800 × 600 mm | Compact applications | |
| UNO 1008 | 1000 × 800 mm | Entry level, small parts | |
| UNO 1208 | 1200 × 800 mm | Extended applications |
Available Models
| Model | Forming Area | Configuration | |
|---|---|---|---|
| DUO 1008 | 1000 × 800 mm | 2 forming stations, single heater | |
| DUO 1208 | 1200 × 800 mm | 2 forming stations, single heater |
DUO Series
Dual-Station Energy-Efficient Machine
Medium-volume production with energy savings through shared heating system. Two forming stations share one common heater for continuous operation capability and reduced energy consumption.
DUO Key Features.
← Swipe to explore →
Dual StationTwo Forming Stations, One Heater
The DUO features two forming stations sharing one common heater. While one station forms, the other loads — resulting in higher throughput and up to 50% energy savings compared to two separate machines.
- ▸2 forming stations, 1 shared heater
- ▸Continuous operation — no idle time
- ▸Up to 50% energy savings vs. 2 machines
HeatingShared IR Heating Oven
Single centrally positioned IR ceramic heating oven serves both forming stations. Swings between stations for continuous production without reheating delays.
- ▸Single shared IR ceramic oven
- ▸Swings between two stations
- ▸No reheating delays between cycles
VacuumDual Vacuum System
Independent vacuum systems for each forming station ensure consistent forming quality on both sides simultaneously. Solenoid valves for pre-blow, vacuum, and ejection.
- ▸Independent vacuum per station
- ▸Consistent forming on both sides
- ▸Solenoid valves for all functions
ControlsPLC Control with HMI Touchscreen
Mitsubishi PLC with touchscreen HMI manages both forming stations, heater swing timing, and recipe storage. Synchronized control for consistent output.
- ▸Mitsubishi PLC for both stations
- ▸Synchronized heater swing control
- ▸Recipe storage for fast changeover
Compatible Materials
UNO vs DUO — Quick Comparison.
| Feature | UNO | DUO |
|---|---|---|
| Forming Stations | 1 | 2 |
| Heating System | Single (top only) | Shared (top & bottom) |
| Operation | Manual load, auto cycle | Continuous alternating |
| Energy Efficiency | Standard | ~50% savings per part |
| Throughput | Standard | Nearly double |
| Footprint | Compact | Larger (2 stations) |
| Best For | Low-medium volume, workshops | Medium-high volume production |
Frequently Asked Questions.
Ready to Get Started?
Contact our team to discuss which machine configuration best fits your production requirements.